EPSON EPL-N4000/EPL-N4000+ Chapter 3 Troubleshooting
Rev.B 97
Multibin 1
∼
10 Full (Error)
Explanation
This error appears when the appointed Multi-bin becomes full.
Remedy
Remove the papers from that bin and press “Continue” switch.
The printer will resume printin
.
Finisher 1
∼
3 Full (Error)
This error appears when the appointed Finisher becomes full.
Remedy
Remove the papers from that Finisher and press “Continue”
switch. The printer will resume printin
.
A-H Cover Open
Explanation
Indicated cover is open.
Remedy
Close that cover.
Set MP Tray (Error)
Explanation
This error appears when both paper tray and ENV tray are not
installed when the printer is turned on.
Remedy
Install the tray, then error is canceled automatically.
Set ENV Tray (Error)
Explanation
ENV is removed after turnin
the power on. Since the Cover is
opened when the paper jam error occurs, the ENV mi
ht be left
uninstalled. Or, non-ENV tray is installed.
Remedy
Install the ENV tray. The error is cancelled automatically.
Manual Feed ssss ttt (Error)
Explanation
Althou
menu on the panel, when the
manual feed mode is selected by ESC/Pa
e command, the
printer indicates appointed paper size and feedin
.
Remedy
Press “Continue” switch or “On-line” switch. If there are papers
in the appointed tray, the printer feeds paper from there. If not,
the printer feeds paper from the device which has most priority.
If there is no paper in any devices, this error appears a
ain.
Paper size error does not occur even the fed paper is different
from the appointed size(tttt).
Invalid Size LC1
∼
5 (Error)
Explanation
This error appears when the detected paper size is not
supported or has undefined value.
Remedy
Pull out the cassette and set the correct paper size. As soon as
the correct paper size is detected, the error is canceled
automatically.
To Next Page
Loading...
