Epson EPL-N4000 - Page 262

EPSON EPL-N4000/EPL-N4000+ Chapter 7 Appendix
Rev.B 248
Figure 7-20. Multibin
↔
Finisher
↔
MCU PWB
Table 7-18. Signal Name
Signal Name Description
OPT$TX+ Status of Finisher or Mailbox sent to MCU. Hi
g
h=Mark.
Low=No mark
OPT#RX+ Status of MCU sent to the Finisher or Mailbox.
Hi
g
h=Mark. Low=No mark
MBS#DET Monitors presence of Mailbox. Hi
g
h=Mailbox not
installed. Low=Mailbox installed
FSNR#DET Monitors presence of Finisher. Hi
g
h=Finisher not
installed. Low=Finisher installed