EPSON EPL-N4000/EPL-N4000+ CHAPTER 1 Product Description
Rev.B 42
Fuser Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the fuser is
replaced. Fuser Counter indicated on the en
ine status sheet
becomes zero and Fuser Chan
e increments by one.
NOTE:The value of Fuser Counter may become negative due to
Total Counter Clear.
LC1 to 5 Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the LC1 to
5 feed rollers are replaced. LC1 to 5 Counters indicated on the
en
ine status sheet become zero and LC1 to 5 FR Chan
es
increment by one.
MP Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the feed
roller of the MP tray is replaced. MP Counter indicated on the
en
ine status sheet become zero and MP FR Chan
e increment by
one.
TR Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the
transfer roller is replaced. TR Counter on the en
ine status sheet
become zero and TR Chan
e increments by one.
DM Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the duplex
unit is replaced. Duplex indicated on the en
ine status sheet
become zero.
FD Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when around
Face-down is replaced. Face-down indicated on the en
ine status
sheet become zero.
FU Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when around
Face-up indicated on the en
ine status sheet become zero.
MB Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the
multibin is replaced. Multibin indicated on the en
ine status sheet
become zero.
Fin Counter Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the finisher
is replaced. Finisher indicated on the en
ine status sheet become
zero.
Staple Count Clear (Maintenance Menu)*
1*2
The serviceman executes this operation only once when the stapler
is replaced. Stapler indicated on the en
ine status sheet become
zero.
Error Lo
Clear (Maintenance Menu)
*2
The error lo
list stored to be indicated on the en
ine status sheet is
cleared. The latest 20 error lo
s are memorized.
NOTE: *
1
: Before executing these operations, the engine must be
stopped completely.
*
2
: After execution, warm boot takes place and the printer
returns to the normal state.
To Next Page
Loading...
