Epson WF-C5890 Series User Manual

Related Information
& “Default Value of the Administrator Password” on page 19
LDAP Server Setting Items
Items Settings and Explanation
Use LDAP Server Select Use or Do Not Use.
LDAP Server Address Enter the address of the LDAP server. Enter between 1 and 255 characters of
either IPv4, IPv6, or FQDN format. For the FQDN format, you can use alphanumeric
characters in ASCII (0x20-0x7E) and "- " except for the beginning and end of the
address.
LDAP server Port Number Enter the LDAP server port number between 1 and 65535.
Secure Connection Specify the authentication method when the printer accesses the LDAP server.
Certicate Validation When this is enabled, the certicate of the LDAP sever is validated. We
recommend this is set to Enable.
To set up, the CA Certicate needs to be imported to the printer.
Search Timeout (sec) Set the length of time for searching before timeout occurs between 5 and 300.
Authentication Method Select one of the methods.
If you select Kerberos Authentication, select Kerberos Settings to make
settings for Kerberos.
To perform Kerberos Authentication, the following environment is required.
❏ The printer and the DNS server can communicate.
❏ The time of the printer, KDC server, and the server that is required for
authentication (LDAP server, SMTP server, File server) are synchronized.
❏ When the service server is assigned as the IP address, the FQDN of the service
server is registered on the DNS server reverse lookup zone.
Kerberos Realm to be Used If you select Kerberos Authentication for Authentication Method, select the
Kerberos realm that you want to use.
Administrator DN / User Name Enter the user name for the LDAP server in 128 characters or less in Unicode
(UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F. This
setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Password Enter the password for the LDAP server authentication in 128 characters or less in
Unicode (UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F.
This setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Kerberos Settings
If you select Kerberos Authentication for Authentication Method of LDAP Server > Basic, make the following
Kerberos settings from the Network tab > Kerberos Settings. You can register up to 10 settings for the Kerberos
settings.
Preparing the Printer and Making Initial Settings > Preparing and Setting Up the Printer Accordin …
100

Epson WF-C5890 Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Print Resolution	Up to 4800 x 1200 dpi
Automatic Document Feeder	Yes, 50 sheets
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Display	4.3" color touchscreen
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Capacity	250 sheets
Fax Transmission Speed	Approximately 3 sec per page
Mobile Printing	Epson Connect, Apple AirPrint, Mopria Print Service
Paper Sizes	A4, A5, A6, B5, B6, Letter, Legal
Print Speed	Up to 25 ppm (black/color)