Epson WF-C5890 Series

Settings > Supply Status
Displays the approximate level of the ink and service life of the maintenance box.
When
is displayed, the ink is running low or the maintenance box is nearly full. When is displayed, you
need to replace the item as ink is expended or the maintenance box is full.
Related Information
& “It is Time to Replace Ink Supply Units” on page 334
Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Print Quality Adjustment:
Select this feature if there are any problems with your print outs. You can check for clogged nozzles
and clean the print head if necessary, and then adjust some parameters to improve print quality.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. e printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Print Head Alignment:
Ruled Line Alignment:
Select this feature to align vertical lines.
Horizontal Alignment:
Select this feature if horizontal banding appears at regular intervals in your printouts.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. e printer feeds paper to clean the
internal rollers.
Pickup roller information:
Select this feature to check the pickup roller service life of the paper cassette. You can also reset the
pickup roller counter.
Related Information
& “Checking and Cleaning the Print Head” on page 264
Product Information > Settings Menu List > Maintenance
397