❏ Do not store the maintenance box in high or freezing temperatures.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how oen this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
When a message is displayed prompting you to replace the maintenance box, refer to the animations displayed on
the control panel.
e
need for replacement of the box does not mean that your printer has ceased to operate in
accordance with its
specications.
e
Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
❏ When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage.
However, you can perform operations that do not use ink such as scanning.
Related Information
& “Maintenance Box Code” on page 355
& “Maintenance Box Handling Precautions” on page 339
It is Time to Replace the Pickup Rollers
Replacing Pickup Rollers for the Paper Cassette Unit
See the slip sheet supplied with the pickup roller's carton box to replace the pickup rollers for the paper cassette
unit.
You can also watch the procedure in the Web Movie Manuals. Access the following website.
https://support.epson.net/publist/vlink.php?code=NPD6983
Related Information
& “Pickup Rollers Code” on page 355
Solving Problems
>
It is Time to Replace the Pickup Rollers
>
Replacing Pickup Rollers for the Paper Cassette Unit
340
To Next Page
Loading...
Need help?
General
