Epson WF-C5890 Series

Control Panel
A
Turns the printer on or o.
Unplug the power cord after checking that the power light is o.
B
Displays setting items and messages.
When no operations are performed for a specic length of time, the printer enters sleep mode and the display
turns o. Tap anywhere on the touch screen to turn on the display. Depending on the current settings, pressing
the buttons on the control panel wakes the printer from sleep mode.
C
Logs o from the printer when Access Control is enabled.
When Access Control is disabled, this is also disabled.
D
Pauses the current printing job and allows you to interrupt another job. However, you cannot interrupt a new job
from the computer.
Press this button again to restart a paused job.
E
Resets the current settings to user default settings. If user default settings have not been made, resets to the
factory default.
F
Displays the Contacts list. You can register, edit or delete the contacts.
G
Clears number settings such as the number of copies.
H
Enters numbers, characters, and symbols.
I
Displays the Job/Status menu. You can check the printer's status and job history.
The error light on the left ashes or turns on when an error occurs.
The data light on the right ashes when the printer is processing data. It turns on when there are queued jobs.
J
Displays the Paper Setting screen. You can select the paper size and paper type settings for each paper source.
K
Stops the current operation.
L
Displays the Help screen.
You can check solutions to problems from here.
M
Returns to the previous screen.
N
Displays the home screen.
Guide to the Control Panel > Control Panel
28