Epson WF-C5890 Series User Manual

Error Messages Solutions
Failed to receive faxes because the fax data
capacity is full. Touch the Job/Status at the
bottom of the Home Screen for details.
Received faxes may accumulate without being processed due to the
following reasons.
❏ Cannot print because a printer error has occurred.
Clear the printer error. To check the details and solutions to the error,
press the
button and then select Printer.
❏ Cannot save in the computer or the memory device.
To check whether or not received faxes have been saved, press the
button and then select Job. To save received faxes, turn on the
computer or connect a memory device to the printer.
The combination of the IP address and the
subnet mask is invalid. See your documentation
for more details.
Contact your printer administrator.
To use cloud services, update the root certicate
from the Epson Web Cong utility.
Contact your printer administrator.
Check that the printer driver is installed on the
computer and that the port settings for the
printer are correct.
Make sure the printer port is selected correctly in Property > Port from
the Printer menu as follows.
Select "USBXXX" for a USB connection, or "EpsonNet Print Port" for a
network connection.
Recovery Mode
Update Firmware
Contact your printer administrator.
Related Information
& “Messages are Displayed on the Control Panel when Scanning to a Network Folder” on page 86
Error Code is Displayed on the Status Menu
If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the
button, and then selecting Job Status. See the following table to
nd
the problem and
its solution.
Code Problem Solution
001 The product was turned o by a power failure. -
101 The memory is full. Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
Solving Problems > A Message or Error Code is Displayed on the LCD Screen > Error Code is Displayed on the Sta …
327

Epson WF-C5890 Series Specifications

General

Brand	Epson
Model	WF-C5890 Series
Category	All in One Printer
Language	English