Note:
If a black line appears when copying from the ADF, location (B) shown in the illustration below may be dirty.
Place the copy result on the scanner glass and wipe away any dirt on the surface of the glass at the point extending from
where the black line appears in the copy result. Be sure to wipe the same point on the opposite surface as well.
(A) Copy result where the black line appeared, (B) position with dirt
Cleaning the Translucent Film
When the printout is not improved
aer
aligning the print head or cleaning the paper path, the translucent
lm
inside the printer may be smeared.
Items required:
❏ Cotton swabs (several)
❏ Water with a few drops of detergent (2 to 3 drops of detergent in 1/4 cup of tap water)
❏ Light for checking smears
c
Important:
Do not use cleaning liquid other than water with a few drops of detergent.
1. Turn o the printer by pressing the
P
button.
2. Open the scanner unit.
Maintaining the Printer
>
Improving Print, Copy, Scan, and Fax Quality
>
Cleaning the Translucent Film
270
To Next Page
Loading...
Need help?
General
