3. Close the ADF cover, and then open the document cover.
4. Clean the part that is shown in the illustration.
Repeat cleaning until there is no dirt remaining.
c
Important:
❏ Aer cleaning o the dirt, wipe o all remaining liquid.
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of
glass cleaner and a so cloth to remove it.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan
quality.
Maintaining the Printer
>
Improving Print, Copy, Scan, and Fax Quality
>
Cleaning the ADF
269
To Next Page
Loading...
