4. Change the settings as necessary.
❏ Audit log setting
Select ON, and then click OK to enable this feature.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > System Administration > Security Settings > Audit Log
❏ Exports the audit logs to the CSV le.
Click Export to export the log as a CSV le.
❏ Deletes all audit logs.
Click Delete to delete all log data.
Related Information
& “Default Value of the Administrator Password” on page 19
Restricting File Operations from PDL
is feature protects les from unauthorized PDL operations.
1. Enter the printer's IP address into a browser to access Web
Cong
.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Product Security tab > File Operations from PDL
4. Sets whether or not allow File Operations from PDL.
5. Click OK.
Related Information
& “Default Value of the Administrator Password” on page 19
Changing the Administrator Password Using Web
Cong
You can set the administrator password using Web Cong.
Changing the password prevents unauthorized reading or
modication
of the information stored on the device,
such as ID, password, network settings, contacts, etc. It also reduces a wide range of security risks, such as
information leaks in network environments and security policies.
1.
Enter the printer's IP address into a browser to access Web
Cong
.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
Administrator Information
>
Product Security Settings
>
Changing the Administrator Password Using Web
…
445
To Next Page
Loading...
Need help?
General
