Epson WF-C5890 Series User Manual

❏ Operation Timeout
If you select ON, when you log in as the access control user or administrator, you are automatically logged
out and go to the initial screen if there is no activity for a certain period of time.
You can set between 10 seconds and 240 minutes by the second.
Note:
You can also set up from the printer’s control panel.
❏ Language : Settings > General Settings > Basic Settings > Language
❏ Panel Lock : Settings > General Settings > System Administration > Security Settings > Admin Settings > Lock
Setting
❏ Operation Timeout : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or
O.)
5. Click OK.
Related Information
& “Default Value of the Administrator Password” on page 19
Controlling the Panel Operation
If you enable the Lock Setting, you can lock the items related to the printer's system settings so that users cannot
change them.
Target Items for Lock Setting
Lock Setting items in the Settings menu
Locked menus are marked with
. Lower level menus will also be locked.
Lock Setting items other than those in the Settings menu
Besides the Settings menu, Lock Setting is applied to the following items in the Presets menu.
❏ Add New
❏ Sort
❏
(Delete)
❏ Add /Remove
Related Information
& “Settings Menu List” on page 364
& “Items at Can Be Set Individually” on page 424
Operating Display and Function Setting Individually
For the some target items of the Lock Setting, you can individually set whether they are enabled or disabled.
Administrator Information > Managing the Printer > Controlling the Panel Operation
423

Epson WF-C5890 Series Specifications

General

Brand	Epson
Model	WF-C5890 Series
Category	All in One Printer
Language	English