Epson WF-C5890 Series User Manual

Transporting and Storing the Printer
When you need to store the printer or transport it when moving or for repairs, follow the steps below to pack the
printer.
!
Caution:
❏ When carrying the printer,
li
it using a stable position.
Liing
the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by two or more people when unpacking and
transporting.
❏ When liing the printer, two or more people should assume the correct positions as shown below. Uninstall the
optional paper cassette unit if it is installed. If you
li
the printer holding other positions, the printer may fall or
you may trap your ngers when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
❏ Be careful not to trap your hand or
ngers
when opening or closing the scanner unit. Otherwise you may be
injured.
c
Important:
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink supply units installed. Removing the ink supply units can dry out the print head and may prevent
the printer from printing.
1.
Tur n
o
the printer by pressing the
P button.
2. Make sure the power light turns
o,
and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is
o.
Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. If the printer supports external storage devices, make sure they are not connected.
5. Remove all of the paper from the printer.
In These Situations > Transporting and Storing the Printer
287

Epson WF-C5890 Series Specifications

General

Brand	Epson
Model	WF-C5890 Series
Category	All in One Printer
Language	English