4. Enter the administrator password to log in as an administrator.
5. Set up the following items as necessary.
❏ Sleep Timer
Enter the time to switch power saving mode when inactivity occurs.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Sleep Timer
❏ Power
O
Timer or Power
O
If Inactive
Select a time to automatically turn o the printer aer it has been inactive for a specic time. When you are
using the fax features, select None or
O
.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Power O Timer or Power O Settings
❏ Power O If Disconnected
Select this setting to turn the printer o aer a specied period of time when all ports including the LINE
port are disconnected. is feature may not be available depending on your region.
See the following website for the specied period of time.
https://www.epson.eu/energy-consumption
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Power
O
Settings >Power
O
If Disconnected
6. Click OK.
Related Information
& “Default Value of the Administrator Password” on page 19
Setting the Sound
Make the sound settings when operating the control panel, printing, faxing and so on.
Note:
You can also set up from the printer’s control panel.
Settings > General Settings > Basic Settings > Sounds
1. Enter the printer's IP address into a browser to access Web Cong.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
Administrator Information
>
Managing the Printer
>
Setting the Sound
432
To Next Page
Loading...
Need help?
General
