Epson WF-C5890 Series

Sending Faxes Using the Stored Document Feature
1. Select Fax Box on the home screen, and then select Stored Documents.
2. Select the document you want to send, check the content of the document, and then select Start Sending.
When the message Delete this document aer sending? is displayed, select Ye s or No.
3. Specify the recipient.
4.
Select the Fax Settings tab, and then make settings such as the sending method as necessary.
“Fax Settings” on page 241
5. Tap
x to send the fax.
Related Information
& “Stored Documents:” on page 247
& “Checking the Status or Logs for Fax Jobs” on page 252
Receiving Faxes on the Printer
If the printer is connected to the phone line and basic settings have been completed using the Fax Setting Wizard,
you can receive faxes.
You can save received faxes, check them on the printer screen, and forward them.
Received faxes are printed in the printer's initial settings.
When you want to check the status of the fax settings, print a Fax Settings List by selecting Fax >
(More) >
Fax Report > Fax Settings List.
Note:
❏ You cannot do the following while receiving a fax.
- Receive other faxes at the same time
- Send faxes
❏ You can perform fax sending operations (up to the stage of reserving a job) even while receiving a fax.
However, you cannot perform operations for sending faxes for jobs that cannot be reserved, such as sending using On
Hook or Direct Send.
Receiving Incoming Faxes
ere are two options in Receive Mode.
Faxing > Receiving Faxes on the Printer > Receiving Incoming Faxes
235