Related Information
& “Default Value of the Administrator Password” on page 19
& “Periodic Cleaning:” on page 394
Controlling the Power Supply to the Printer Using Web
Cong
You can turn o or restart the printer from a computer using Web Cong even when the computer is located
remotely away from the printer.
1.
Enter the printer's IP address into a browser to access Web
Cong
.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Device Management tab > Power
4. Select Power O or Reboot
5. Click Execute.
Related Information
& “Default Value of the Administrator Password” on page 19
Restore Default Settings
You can select the network settings or other settings stored in the printer and restore these settings to their
defaults.
1. Enter the printer's IP address into a browser to access Web Cong.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3.
Select in the following order.
Device Management tab > Restore Default Settings
4. Select an option from the list.
5. Click Execute.
Follow the on-screen instructions.
Administrator Information
>
Managing the Printer
>
Restore Default Settings
439