❏ When the following window is displayed, select Print in Black.
❏ When the following window is displayed, cancel printing. And then, printing again.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
Follow the steps below when printing again.
1. Access the printer driver window.
2. Select a Paper Type that supports Print in Black.
3. Select Grayscale.
4. Set the other items on the Main and More Options tabs as necessary, and then click OK.
Solving Problems
>
It is Time to Replace Ink Supply Units
>
Temporarily Printing with Black Ink
337
To Next Page
Loading...
