Epson WF-C5890 Series User Manual

c
Important:
❏ Do not turn
o
or unplug the printer until the update is complete.
e
next time you turn on the printer,
"Recovery Mode" may be displayed on the LCD screen and you may not be able to operate the printer.
❏ If "Recovery Mode" is displayed, follow the steps below to update the rmware again.
1. Connect the computer and the printer using a USB cable. (You cannot perform updates in recovery mode over
a network.)
2. Download the latest rmware from the Epson website and start updating. For details, see "Update method" on
the download page.
Note:
You can set to update the rmware automatically from Web Cong. Select the Device Management tab > Automatic
Firmware Update, enable the settings, and then set the day of the week and time.
Updating Firmware Using Web Cong
When the printer can connect to the Internet, you can update the rmware from Web Cong.
1. Enter the printer's IP address into a browser to access Web Cong.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Device Management tab > Firmware Update
4. Click Start, and then follow the on-screen instructions.
e rmware conrmation starts, and the rmware information is displayed if the updated rmware exists.
Note:
You can also update the rmware using Epson Device Admin. You can visually conrm the rmware information on the
device list. It is useful when you want to update multiple devices' rmware. See the Epson Device Admin guide or help for
more details.
Updating Firmware without Connecting to the Internet
You can download the device's rmware from Epson website on the computer, and then connect the device and the
computer by USB cable to update the rmware. If you cannot update over the network, try this method.
1. Access Epson website and download the rmware.
2. Connect the computer that contains the downloaded rmware to the printer by USB cable.
3. Double-click the downloaded .exe le.
Epson Firmware Updater starts.
4. Follow the on-screen instructions.
Administrator Information > Managing the Printer > Updating the Firmware
436

Epson WF-C5890 Series Specifications

General

Brand	Epson
Model	WF-C5890 Series
Category	All in One Printer
Language	English