Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 87
Menu choice Possible choices Explanation
Zoom… – Press the ENTER button to display the Zoom
dialog box.
• To change the zoom position, select the
top button and then press the navigation
pad left/right.
• To change the zoom speed (0-100) select
Speed and use the navigation pad to
adjust the speed value.
Select the
Digital Zoom button and press the
ENTER to show the Digital Zoom dialog box.
• To change the digital zoom factor
(1x, 2x, or 4x), select the top button and
then press the navigation pad left/right.
• To move the image area that will be
covered select
Pan X or Pan Y and use the
navigation pad to move the area.
To Next Page
Loading...
