Menu choice Possible choices Explanation
Focus… – Press the ENTER button to display the Focus
dialog box.
• To change the focus, select the top but-
ton and then press the navigation pad
left/right
• To autofocus the camera, select the
Auto
button and press the navigation pad
left/right
• To set the camera to the xed focus
position, select the Fix button and press
the navigation pad left/right
•
To leave the dialog box, press ENTER
NUC – Press the ENTER button to make the camera
perform a NUC, i.e. a non-uniformity correc-
tion.
The NUC function performs an internal cali
-
bration to correct for image non-uniformities
that arise due to the slightly different offset
characteristics occurring from detector to
detector within the array.
Range... – Press the ENTER button to display the Range
dialog box.
The camera has been calibrated to be used
for different temperature ranges. Use the
navigation pad to select between the different
temperature ranges.
• Press the ENTER button to conrm.
To Next Page
Loading...
