Ranger HRC™ operator´s manual – IR Camera software
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008 89
Menu choice Possible choices Explanation
Freeze – Press the ENTER button to freeze the image.
When the image is frozen, this menu item will
be displayed as
Live.
Manual adjust
Automatic adjust
– To switch between manual adjustment and
automatic adjustment of the image, press
ENTER.
The current adjustment mode will be dis
-
played in the top line status indicator.
Adjust image... – Select Adjust image and press ENTER to
display the Adjust image dialog box. In this
dialog box you can change level and span, or
the corresponding brightness and contrast.
The appearance of this dialog box depends
on the settings for Adjust mode and Color
distribution in the Image Setup dialog box.
If
Manual and Histogram or Linear are
selected in the Image Setup dialog box,
you can change level and span by using the
navigation pad.You can also carry out an one-
shot autoadjust maneuver.
If Level/Span and Histogram or Linear are
selected in the Image Setup dialog box, you
can change brightness and contrast by using
the navigation pad. This will be indicated by
AUTO* in the top line status bar.
To Next Page
Loading...
