5 Tools
130
Tools
5
If you frequently use non-standard size paper for copying, assigning the paper size to a
button will save your time to specify the size each time. It is also convenient to set the
commonly used paper sizes toward the top.
A/B Series Size
You can select from sizes of A and B series.
Inch Size
You can select from sizes of inch series.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the width (X) within the range 98 to 483 mm, and the height (Y)
within the range 89 to 320 mm in 1 mm increments.
Auto Tray Switching Control
Set the method of auto tray switching when running out of paper loaded in the tray selected.
Auto Tray Switching
You can select from [Always Enable], [Enable during Auto Paper Select], or [Enable for Same
Paper Type/Color].
Targeted Paper Type (Copy Jobs)
You can select paper types.
When [According to Priority Assigned] is selected, the paper type is determined according to
the settings in [Paper Tray Priority] under the [Paper Tray Settings].
Targeted Paper Color (Copy Jobs)
You can target all paper colors or only one paper color.
Note • The machine does not switch the tray automatically in the following cases:
- The Tray 5 (Bypass) is selected.
- The tray containing paper other than plain paper, recycled paper, side 2 paper, or Custom1
to Custom 5 paper is selected.
- The tray containing paper that is set as [Auto Paper Off] in [Paper Type Priority] is selected.
Image Quality
You can specify the image quality processing method for each of bond paper, plain paper,
recycled paper, Plain Reload paper, heavyweight paper, heavyweight reload paper, Extra
heavyweight paper, Extra heavyweight Reload paper, and custom paper 1 to 5.
When copying or printing a document, the machine controls the image quality according to
the type of paper set in [Paper Tray Attributes] and the image quality processing method
specified for that type of paper.
Refer to the following table for available setting items.
For information about paper characteristics and notes on use, refer to "Loadable Quantity and Sheets for
Supported Paper" (P.30).
Setting values Meaning
Plain A Default setting for plain paper. The image quality is suitable
for color printing. Paper having ream weight of 80 - 105 g/m
2
.
Plain B Default setting for bond paper. The image quality is suitable
for general office use. Paper having ream weight of
60 - 79 g/m
2
.
Plain C Default setting for recycled paper. The image quality is
suitable for the recycled paper of 70% or more recycled pulp
included. Paper having ream weight of 60 - 79 g/m
2
.