5 Tools
184
Tools
5
Searchable - Text Compression
Set whether or not to compress searchable text.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Scan to PC Defaults
Transfer Protocol
You can select the default protocol (transfer protocol) used for transfer from FTP, SMB, and
SMB (UNC Format).
Login Credential to Access Destination
Specify login credential usage for saving to an access destination.
îš„None
Provide no user login credentials when saving to an access destination.
îš„Remotely Authenticated User
Provide user login credentials when saving to an access destination.
Note • Unless remote authentication is enabled, no authentication is performed.
User Name for FTP Scan
When using login credentials for the user name for FTP transfers, specify whether to include
the domain portion of the credentials.
Select either [User Name Only] or [Add Domain Name].
îš„User Name Only
Use only the user name part (before '@') of the login credential name for the login name. The
domain part is not used.
îš„Add Domain Name
If a domain name is to be added to the login user name, use the whole login credential name
(including the domain name) for the user name.
Original Size Defaults
Set the original size shown in [Original Size] in the [Layout Adjustment] screen. An
original size is assigned to each of the 11 buttons other than [Auto Detect].
When frequently scanning non-standard size originals, by presetting the non-standard
size, you can save time to enter the original size each time a document is scanned.
îš„A/B Series Size
Select from the A and B series, such as A4 and B5.
îš„Inch Size
Select from the Inch series, such as 8.5 x 11" and 11 x 17".
îš„Others
Select from the sizes other than the above series, such as photo and postcard sizes.
îš„Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.
To Next Page
Loading...
Need help?
General
