3 Maintenance
66
Maintenance
3
2
Pull out the hole punch waste container.
3
Empty the container.
4
Insert the empty hole punch waste container
all the way into the finisher.
5
Close the front transport cover and the top
cover of the finisher.
Note • If the front cover of the finisher is not completely closed, a message will appear and the
machine will not operate.
Emptying the Punch Waste Container (for Finisher-C1 or Finisher-C1 with
Booklet Maker)
When the hole punch waste container becomes full, a message appears on the touch
screen. When the message is displayed, empty the hole punch waste container as
instructed.
Make sure to discard all paper chads when emptying the hole punch waste container.
If you do not empty the container completely, the container becomes full before the
message stating to empty the container appears again, and this can cause a
breakdown of the machine.
Important • Make sure you empty the hole punch waste container when the power is on. If you empty
the container when the power is off, the machine will not recognize that the container has
been emptied.
To Next Page
Loading...
Need help?
General
