Faults
97
Machine Status
4
Faults
This section describes how to check the information of errors that occurred on the
machine.
The error history report shows the latest 50 errors. The items displayed include the date
and time, error code, and error category.
The following describes how to print the error history report.
1
Press the <Machine Status> button.
2
Select the [Faults] tab.
3
Select [Error History Report].
4
Press the <Start> button.
Note • You can also access the [Error History
Report] from the [Print Reports] on the
[Machine Information] screen.
• If [Print Report Button] under [Reports] is
set to [Disabled], the [Error History
Report] button does not appear on the
screen. For information on [Reports],
refer to "Reports" (P.133).
To Next Page
Loading...
Need help?
General
