EasyManuals Logo

Fuji Xerox ApeosPort-III C2201 User Manual

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #311 background imageLoading...
Page #311 background image
Installation Procedure
309
Using the Server Fax Service
11
Installation Procedure
Installation Overview
This section describes the configuration procedure to use the Server Fax feature on the
machine.
The following shows the reference section for the configuration procedure.
Step 1 Fax Settings................................................................................................................... 309
Step 2 Setting the Server Fax Feature ...................................................................................... 310
Step 1 Fax Settings
If your machine does not support the Fax feature and supports the Server Fax feature
only, the Server Fax feature will be enabled automatically.
If your machine supports both the Fax and Server Fax features, manually switch to the
Server Fax feature.
The following procedure explains how to switch to the Server Fax feature on
CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to "Setting Items Using CentreWare
Internet Services" (P.253)
.
Note You can switch to the Server Fax feature also on the machine’s Control Panel.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address into the address box on the
browser, and click [Enter].
z
Example of the IP address entry
http://192.168.1.1/ (IPv4)
http://[2001:DB8::1234] (IPv6)
z
Example of the Internet address entry
http://myhost.example.com/
Note When specifying a port number, add “:” and the port number to the end of the Internet
address.
3
Click the [Properties] tab.
4
Click [+] on the left of [Services] to display the items in the folder.
5
Click [+] on the left of [Fax] to display the items in the folder.
6
Click [Fax Settings].
7
On the [Fax Settings] screen, select [Scan to Fax Server] under [Fax Service].
8
Reflect the values as the machine's setting values.
1) Click [Apply].
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot Machine]. The machine will reboot and the setting values will be
reflected.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-III C2201 and is the answer not in the manual?

Fuji Xerox ApeosPort-III C2201 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-III C2201
CategoryAll in One Printer
LanguageEnglish

Related product manuals