EasyManuals Logo

Fuji Xerox ApeosPort-III C2201 User Manual

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #552 background imageLoading...
Page #552 background image
15 Appendix
550
Appendix
15
O The job can be executed during the interrupt mode.
X The job cannot be executed during the interrupt mode.
*1 The job instruction from the control panel is required/not required to execute the job.
*2 Regular Print, the first set of Sample Set, Delayed Print (auto print)
*3 Secure Print, Private Charge Print, Sample Set, Delayed Print, Charge Print
*4 During interruption, any document displayed as a pending job on the [Job Status] screen can be printed by selecting
[Promote Job]. When priority printing is instructed during interruption, the next priority printing is disabled until the
instructed print job is completed.
Note • The followings jobs are executed regardless of the interrupt mode.
- Automatic fax transmission (to mailbox/relay broadcast)
- Fax reception
Notes and Restrictions on the Use of the Internet Fax Feature
Notes on E-mail Transmissions
"Doc. Sent" that appears on the communications confirmation screen, activity report,
or transmission report indicates that an e-mail has been delivered to the SMTP server,
which was configured on the machine for transmitting e-mail. The e-mail, however, may
not reach its destination for some problem over the Internet. In such case, the machine
will not be notified of such transmission error. After sending an important e-mail, we
suggest you to confirm it is received, such as by calling the recipient.
Feature Combinations when Transmitting an Internet Fax
z
[Resolution] on the [Fax/Internet Fax] screen
When [TIFF-S] is selected for [Internet Fax Profile] on the [Fax/Internet Fax Options]
screen, [Superfine (400 dpi)] or [Superfine (600 dpi)] cannot be selected.
For information on Internet Fax profiles, refer to "4 Fax" > "Internet Fax Profile (Specifying Internet
Fax Profiles)" in the User Guide.
z
[Starting Rate] on the [Fax/Internet Fax Options] screen
The communication mode can be specified only when sending e-mail using the fax
gateway feature. For other cases, e-mail is sent via G3 Auto.
For more information on the fax gateway feature, refer to "4 Fax" > "Sending an Internet Fax to
normal fax machines via a relay station" in the User Guide.
z
[Original Size] on the [Layout Adjustment] screen
When [TIFF-S] is selected for [Internet Fax Profile] on the [Fax/Internet Fax Options]
screen, Internet Fax is sent in A4 even if a size larger than A4 is specified.
For information on Internet Fax profiles, refer to "4 Fax" > "Internet Fax Profile (Specifying Internet
Fax Profiles)" in the User Guide.
Internet Fax Profiles
z
When specifying an Internet Fax profile
The Internet Fax profile that can be processed varies depending on the machine that
the recipient uses. When specifying an Internet Fax profile, confirm if it can be
processed by the recipient's machine.
z
When an Internet Fax profile not supported by the recipient's machine is specified
Job Flow Sheet Execution of a job flow sheet instructed in
[Mailbox] or [Job Flow Sheets] on the touch
screen
Required O
Job
Job Instruction
from the
Control Panel
*
1
Job
Execution

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-III C2201 and is the answer not in the manual?

Fuji Xerox ApeosPort-III C2201 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-III C2201
CategoryAll in One Printer
LanguageEnglish

Related product manuals