Web Applications Service Setup (ApeosPort Series Models Only)
205
Tools
5
Web Applications Service Setup (ApeosPort Series Models
Only)
[Web Applications Service Setup] allows you to specify the remote access destination.
Remote access allows you to view web application services, which are compatible with
the machine, directly on the control panel, to upload a document that has been scanned
on the machine to the web applications, and to directly select and print a document
which is stored in the remote server. It also allows you to directly upload and print a file
without going through another computer.
Note • To use this feature, Remote Access Kit (optional) and any Fuji Xerox manufactured web
applications (can be purchased separately) are required. For details, contact our Customer
Support Center.
1
On the [Tools] screen, select [System Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.104).
2
Select [Web Applications Service Setup].
3
Select the item to be set or changed.
Server Certificate Verification Settings
When the machine is connected to a remote server (ASP) that is located in the Internet
zone, server certificate verification is available to prevent phishing attempts, as with a
Windows web browser. Configure the following settings.
Preparations
Download a root certificate (CA certificate) of the root certification authority, which
issues the server certificate for the remote server to be connected, to a computer
connected to CentreWare Internet Services.
The CA certificate formats that can be used are as follows:
z
DER encoded binary X.509 (.CER)
z
Base 64 encoded X.509 (.CER)
z
Cryptographic Message Syntax Standard - PKCS #7 Certificates (.P7B)
Setting Procedure
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.252).
2
Generate a certificate.
If using the registered certicicate, proceed to Step 3.
1) Click the [Properties] tab.
2) Click [+] on the left of [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Self Signed Certificate] button.