Accounting
235
Tools
5
îš„Hide
As you enter the Account ID, the character string is hidden as a row of asterisks (∗∗∗∗∗).
Store User Details
You can set the destination to save authentication information. Select [NVM] or [Hard Disk].
Note • This item appears when [Network Accounting] is selected in "Accounting Type" (P.233).
• NVM stands for nonvolatile memory and the data on it is stable after the machine has been
turned off.
Fax Billing Data
You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Administration prior to the operations. For details on how to enable the fax feature, refer to
"Service Access" (P.237).
Note • Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to "Billing - Day Time, Billing - Night
Time, Billing - Midnight" (P.226).
• The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to "Billing Data List" (P.88).
1
Enter the System Administration mode.
For details on how to enter the System Administration
mode, refer to "System Settings Procedure" (P.104).
2
Select [Fax Billing Data] and select [Change
Rate per Unit].
îš„Charge Rate per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the keyboard
displayed on the screen or the numeric
keypad.
5
Select [Save].
To Next Page
Loading...
Need help?
General
