5 Tools
142
Tools
5
Offset per Job
Offsets the output position for each job being specified.
Auto Job Promotion
You can select whether to allow other jobs that can be started to automatically bypass the
job, if the machine is unable to start an operation for any reason, (for example, running out of
paper in a tray when starting copying or printing).
Note • Stored documents such as Secure Print and Sample Set documents are excluded from Auto
Job Promotion.
Default Print Paper Size
Set the paper size used when printing reports or lists.
You can select from two sizes: A4 or 8.5 × 11".
Odd Page 2 Sided
Specifies whether to add a blank page to a document that contains an odd number of pages,
so that the document prints as an even number of pages.
Paper Size Settings
Specifies the paper size table used when the machine is set to detect standard sizes of
documents.
You can select from the following tables: [A/B Series (8×13”)], [A/B Series], [A/B Series (8K/
16K)], [A/B Series (8×13”/8×14”)], and [Inch Series].
Refer to the following tables for the combinations of sizes that can be detected automatically.
Paper size group
AB series(8
× 13")
AB series
Loading
position
Size/
Orientation
Document glass
Document feeder
Tray 1 to 4
Tray 5 (Bypass)
Document glass
Document feeder
Tray 1 to 4
Tray 5 (Bypass)
A6
OXXXOXXX
A5
OOOOOOOO
A5
OXXOOOXO
A4
OOOOOOOO
A4
OOOOOOOO
A3
OOOOOOOO
B6
OXXOOXXX
B6
XXXXXXXO
B5
OXOOOOOO
B5
OOXOOOOO
B4
OOOOOOOO
5.5 × 8.5
XXXXXXXX
5.5 × 8.5
OOXXXXXX
7.25 × 10.5
XXXXXXXX
7.25 × 10.5
XOOXXXXX
8 × 10
XXXXXXXX
To Next Page
Loading...
Need help?
General
