4 Machine Status
90
Machine Status
4
Auditron Reports
You can print an auditron report by user. Note that the content on the screen differs
depending on whether the Account Administration feature is enabled.
Note • [Auditron Reports] appears when the System Administration mode is selected.
When the [Accounting Type] is set to other than [Local Accounting]
When the [Accounting Type] of each service is set to other than [Local Accounting], the
following screen appears, allowing you to print a printer meter report.
1
Select [Auditron Reports].
Note • To display the [Auditron Reports] screen, select the <Machine Status> button, and then
select [Machine Information] > [Print Reports] > [Auditron Reports].
2
Select [Meter Report (Print Jobs)].
3
Press the <Start> button.
îš„Meter Report (Print Jobs)
You can check the total printed pages and the total sheets used for each client (job
owner). [Meter Report (Print Jobs)] counts pages from the time at which the data has
been initialized.
When the [Accounting Type] is set to [Local Accounting]
When the [Accounting Type] is set to [Local Accounting], the following screen appears.
The auditron report for each user organized by each service can be printed for the services of
which the Account Administration feature is set to [On].
For information on enabling the Account Administration feature for each service, refer to "Accounting"
(P.229).
1
Select [Auditron Reports].
Note • To display the [Auditron Reports] screen, select the <Machine Status> button, and then
select [Machine Information] > [Print Reports] > [Auditron Reports].
2
Select the auditron report to be printed.
3
Select a range of user numbers to be
printed.
Note • Selecting [Select All] selects all
users.
4
Press the <Start> button.
îš„Auditron Report (Copy Jobs)
You can check the total number of pages copied on the machine. If the maximum limit
is set for the number of pages or colors that can be scanned, you can also view the limit
value. [Auditron Report (Copy Jobs)] counts pages from the time at which the data has
been initialized.
To Next Page
Loading...
Need help?
General
