Setting Items Using CentreWare Internet Services
253
CentreWare Internet Services Settings
6
Setting Items Using CentreWare Internet Services
CentreWare Internet Services enable you to alter various settings on the machine from
a computer.
Note • Confirm that the port in use is enabled in [Port Settings] of the [Properties] tab, if an item that
you want to set is not displayed.
• When a setting is changed from CentreWare Internet Services while operating the control
panel, the setting items changed on the screen of the control panel are not displayed. Switch
the machine off and on in this case.
• If you are prompted for your user name and password when changing settings on
CentreWare Internet Services, enter the administrator's user ID and passcode into the [User
Name] and [Password] fields. As default, the user name is '11111' and the passcord is 'x-
admin'.
The items that can be configured using CentreWare Internet Services are as follows.
Note • Click [Help] at the top right of the CentreWare Internet Services screen for details on the
setting items.
z
Mailbox
Allows you to register a mailbox, as well as import or print documents saved in a
mailbox.
z
Job Flow Sheets
Allows you to register, edit, or delete job flow sheets.
z
Paper Tray Attributes
Allows you to configure the settings priority for the respective paper tray.
z
Paper Settings
Allows you to configure the settings priority for the respective paper type.
z
Power Saver/Energy Saver Settings
Allows you to configure the power saver time-out of the machine.
z
Stored Document Settings
Allows you to configure the passcode for secure print and charge print.
z
Memory Settings
Allows you to configure the settings for the free space available and the print page
buffer size.
z
Web Browser Setup (ApeosPort series models only)
Allows you to configure the settings for the web browser that is used when the Web
Applications service is used.
z
Internet Services Settings
Allows you to configure the settings for CentreWare Internet Services.
z
Pool Server Settings
Allows you to configure pool server settings.
z
Web Applications Service Setup (ApeosPort series models only)
Allows you to configure the server to be connected when using the Web Applications.
z
Cloning
Allows you to configure the settings for authentication information.
To Next Page
Loading...
Need help?
General
