Stapler Faults
481
Problem Solving
14
4
After removing the staple cartridge, check
inside of the finisher for any remaining
staples.
5
Pull up the metal part of the staple cartridge
as shown in the figure.
6
Remove the jammed staples (1), and return
the metal part pulled up in Step 5 to the
original position (2).
7
Return the staple cartridge to its original
position until it clicks into place
8
Close the front cover of the finisher.
Note • If the front cover is not completely closed,
a message will appear and the machine
will not operate.
Staple Jams in the Staple Cartridge (For Finisher-C1 or Finisher-C1 with
Booklet Maker)
This section explains how to remove jammed staples from Finisher-C1 with Booklet
Maker (optional). Use the same procedure for Finisher-C1 (optional).
CAUTION
Be careful in removing jammed staples.
1
2
To Next Page
Loading...
Need help?
General
