EasyManuals Logo

Fuji Xerox ApeosPort-III C2201 User Manual

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #482 background imageLoading...
Page #482 background image
14 Problem Solving
480
Problem Solving
14
6
Push the staple cartridge into the machine
until it clicks into place.
7
Close the front cover of the finisher.
Note • If the front cover is not completely closed,
a message will appear and the machine
will not operate.
If you cannot remove jammed staples even
after you use the above procedure, contact our Customer Support Center.
Staple Jams in the Staple Cartridge (For Finisher-B1)
The following describes how to clear staple jams in the Finisher-B1 (optional).
1
Make sure that the machine has stopped,
and open the front cover of the finisher.
2
Grip the lever as shown in the figure to pull
out the staple cartridge to the right, towards
you.
3
Move up the staple cartridge, and take it out
of the machine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-III C2201 and is the answer not in the manual?

Fuji Xerox ApeosPort-III C2201 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-III C2201
CategoryAll in One Printer
LanguageEnglish

Related product manuals