1 Before Using the Machine
22
Before Using the Machine
1
Customizing the Control Panel
Use the following procedure to select the screen to be displayed when the machine is
turned on or exited from the Energy Saver mode, to select the screen to be displayed
after Auto Clear, to assign features to <Custom> buttons, and to select the features to
be displayed on the [All Services] screen.
1
Press the <Log In/Out> button.
2
Enter the Administrator ID with the numeric
keypad or the keyboard displayed, and
select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools].
4
Select [Screen/Button Settings].
123
456
789
0 #
C
<Log In/Out> button
To Next Page
Loading...
Need help?
General
