Fuji Xerox ApeosPort-III C2201 User Manual

Energy Saver Mode
21
Before Using the Machine
1
From Last Operation to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note • The default for [From Last Operation to Sleep Mode] is [1] minutes. Configure the [From Last
Operation to Sleep Mode] time to be longer than the [From Last Operation to Low Power
Mode] time.
7 Select [Save].
8 Select [Close] repeatedly until the [Tools] screen is displayed.
9 Select [Close] to display the [All Services] screen.

Fuji Xerox ApeosPort-III C2201 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C2201
Category	All in One Printer
Language	English