Fuji Xerox ApeosPort-III C2201 User Manual

14 Problem Solving
474
Problem Solving
14
Paper Jams at 4b in the Finisher (For Finisher-C1 with Booklet Maker)
1 Open the front cover of the finisher.
2 Move Lever 4b to the left.
3 Remove the jammed paper if there is.
4 Pull out Unit 4.
5 Remove all the jammed paper from the
upper left side and inside of the unit.
6 Return Unit 4 to its original position.
7 Return Lever 4b to its original position.
8 Close the front cover of the finisher.
Note • If the front cover is not completely closed, a message will appear and the machine will not
operate.

Fuji Xerox ApeosPort-III C2201 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C2201
Category	All in One Printer
Language	English