Configuration for Account Administration
353
Authentication and Account Administration
13
Configuration for Account Administration
This section explains how to configure the machine to use the account administration
feature.
The following shows the reference section for each item.
Step 1 Selecting an Accounting Type ...................................................................................... 353
Step 2 Registering User Information........................................................................................ 353
Step 1 Selecting an Accounting Type
Use the following procedure to select an accounting type.
Note • For information on relationships between the authentication and accounting modes, refer to
"Relationships Between the Authentication and Accounting Modes" (P.335).
1
Press the <Log In/Out> button.
2
Using the numeric keypad or the keyboard displayed, enter the system administrator’s
user ID to enter the System Administration mode, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools].
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and select [Save].
Note • The available options are [Local Accounting], [Network Accounting], and [Xerox Standard
Accounting].
Refer to "Accounting Type" (P.233).
Step 2 Registering User Information
Use the following procedure to register user information.
1
Press the <Log In/Out> button.
2
Using the numeric keypad or the keyboard displayed, enter the system administrator’s
user ID to enter the System Administration mode, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools].
4
Select [Accounting].
5
Select [Create/View User Accounts].
6
Select "(Not in Use)" and select [Create/Delete].
To Next Page
Loading...
Need help?
General
