ESC/P-K Emulation
511
Appendix
15
Basic Settings
Setting Item
Item
Number
Value
Output Color 5 Sets the output color.
[0] (Default) : Color
[1] : Monochrome
Paper tray 3 Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5 (Bypass)
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important•When Trays 1 to 4 is selected, the size of paper loaded in the tray
becomes the output paper size, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected, and if the paper of the same size is loaded
in the same orientation in multiple trays, paper will be supplied in the
order of Tray 1 J Tray 2 J Tray 3J Tray 4. If paper of the same size
is loaded in multiple trays but in different orientations, the paper
loaded in the landscape orientation is given priority.
Document size 1 Sets the client-created document size.
[99] (Default) : Paper
[100] : Continuous form paper (10 x 12)
[101] : Continuous form paper (10 x 11)
[102] : Continuous form paper (15 x 12)
[103] : Continuous form paper (15 x 11)
[3] : A3
[4] : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 x 14
[22] : 8.5 x 13
[23] : 8.5 x 11
[24] : 11 x 17
[0] : Postcard
The number of characters printed is: 80 characters/72 rows for
continuous form paper (10 x 12), 80 characters/66 rows for continuous
form paper (10 x 11), 136 characters/72 rows for continuous form paper
(15 x 12), and 136 characters/66 rows for continuous form paper (15 x
11).
Note •When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
•When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge],
the machine automatically calculates the magnification based on
[Original Size] and [Paper Size]. If the magnification, however, is not
within 45-210%, the original will not be reduced/enlarged, and will be
printed in a scale of 100%. When [2 Up] is selected, the machine
automatically calculates the magnification based on [Original Size]
and 1/2 of [Paper Size].
•The orientation set here is that of the original. It is not affected by the
orientation of paper loaded in the paper trays.
To Next Page
Loading...
Need help?
General
