Machine Information
91
Machine Status
4
Note • [No.] displayed on the report is the No. (User Administration Number) registered for the
Authentication and Account Administration feature.
îš„Auditron Report (Print Jobs)
You can check the total printed pages and the total sheets used for each client (job
owner). [Auditron Report (Print Jobs)] counts pages from the time at which the data has
been initialized.
Note • [No.] displayed on the report is the No. (User Administration Number) registered for the
Authentication and Account Administration feature.
îš„Auditron Report (Scan Jobs)
You can check the total number of pages scanned on the machine. If the maximum limit
is set for the number of pages that can be scanned, you can also view the limit value.
[Auditron Report (Scan Jobs)] counts pages from the time at which the data has been
initialized.
Note • [No.] displayed on the report is the No. (User Administration Number) registered for the
Authentication and Account Administration feature.
îš„Auditron Report (Fax Jobs)
You can check the number of fax transmissions/receptions and the number of pages
transmitted for each user. For Account Administration settings, refer to "Accounting"
(P.229).
1
Select [Auditron Reports].
Note • To display the [Auditron Reports] screen, select the <Machine Status> button, and then
select [Machine Information] > [Print Reports] > [Auditron Reports].
2
Select [Meter Report (Fax Jobs)].
3
Select a range of user numbers to be printed.
Note • Selecting [Select All] selects all users.
4
Press the <Start> button.
Note • [No.] displayed on the report is the No. (User Administration Number) registered for the
Login Setup/Auditron Administration feature.
Automatically Printed Reports/Lists
Some reports/lists relating to the fax and scan services can only be printed
automatically. This section describes reports/lists that can be printed automatically.
Transmission Report - Job Undelivered
Printed when a transmission of transferring the scanned data to the computer on the
network, or sending the scanned data by e-mail has failed. When a fax or the Internet
Fax transmission has failed, this report will also be printed. You can check a reduced
image of the scanned data and its transmission result.
Set whether to print out the Transmission Report - Undelivered automatically from the
system administrator mode.
For information on specifying whether or not to have the report printed automatically, refer to "Scan File
Transfer Report" (P.134).
Transmission Report
Printed when a transmission of transferring the scanned data to the computer on the
network, or sending the scanned data by e-mail has succeeded. When a fax or the
To Next Page
Loading...
Need help?
General
