EasyManuals Logo

Fuji Xerox ApeosPort-III C2201 User Manual

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #466 background imageLoading...
Page #466 background image
14 Problem Solving
464
Problem Solving
14
Paper Jams in the Tray 5 (Bypass)
The following describes how to clear paper jams in the Tray 5 (Bypass).
1
Check the back of the Tray 5 (Bypass)
(around the paper feed entrance) and
remove the jammed paper.
Important • When two or more sheets of paper are
loaded, remove all of the sheets from the
tray.
Note • If the paper is torn, check for any torn
pieces inside the machine.
2
Fan the paper you removed making sure that
all four corners are neatly aligned.
3
Insert the paper into the tray with the printing
side facing down until its leading edge lightly
touches against the paper feed entrance.
Paper Jams in Duplex Unit B
The following describes how to clear paper jams in the duplex unit B if the machine
supports the 2 sided printing feature.
1
Open Tray 5 (Bypass), and then gently open
the duplex unit cover while lifting up the
release lever.
2
Remove the jammed paper.
Note • If the paper is torn, check for any torn
pieces inside the machine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-III C2201 and is the answer not in the manual?

Fuji Xerox ApeosPort-III C2201 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-III C2201
CategoryAll in One Printer
LanguageEnglish

Related product manuals