Fax Service Settings
189
Tools
5
Internet Fax Subject
Set the default value for the Internet Fax subject. Up to 128 characters can be entered for the
subject.
Fax Control
You can set the fax control settings.
Re-enter Recipients
Set whether to re-enter the recipient after once specifying the recipient, in order to reduce the
risk of sending fax or Internet Fax to the wrong address. When Re-enter Recipients is acti-
vated, if you specify the recipient by entering the phone number, or by selecting from the
Address Book, the screen prompting you to re-enter the recipient appears. If the same recipi-
ent has been entered, the transmission process will start.
Re-enter Broadcast Recipients
This setting is required when you activated [Re-enter Recipients]. Set whether to allow the
Broadcast Send.
z
Enter Once Only
Allows the Broadcast Send. No need to re-enter the recipient.
z
Enter Twice
Allows the Broadcast Send. Re-entering the recipient is required.
z
Broadcast Disabled
No Broadcast Send is allowed.
Re-enter Speed Dial Recipients
This setting is required when you activated [Re-enter Recipients]. Select how to re-enter a
recipient after the first entry.
z
Enter Once Only
No need to re-enter the recipient.
z
Enter Twice
Use the speed dial feature to re-enter the recipient.
z
Re-enter Fax Number or E-mail
Specify the recipient by dialing the fax number or entering the e-mail address.
Re-enter Group Recipients
Specifies whether re-enter of group addresses is required after entering a group address.
Broadcast Checkbox on 1st Tab
Specifies whether to show a button (checkbox) in the [Fax/Internet Fax] screen to explicitly
express broadcast directions.
Manual Redial List - Saved Entries
Specifies the number of redial destinations to be stored.
Manual Redial List - Dial Mode
Specifies the destination type to be stored as a redial destination number.
When all the check marks are cleared, the redial feature becomes disabled.
Transmission Header Text - Polling
Set whether to attach a send header to a polling document.