Print Service Settings
179
Tools
5
îš„Off
Does not print banner sheets.
îš„Start Sheet
Prints a banner sheet before a print job.
îš„End Sheet
Prints a banner sheet after a print job.
îš„Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Banner Sheet Offset
Set whether to use the offset feature when banner sheets are output.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from Trays 1 to 4.
Separator Tray
Set the paper tray to use for the separators.
PostScript Default Color
Set the default value for Post Script output color.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
disabled.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
PostScript Font Absence
Set the action to be taken when a PostScript font specified in a job is not present.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„Cancel Printing
Cancels printing.
îš„Substitute Font and Print
Continues printing, using a substitute font. Courier is used as the substitute font.
PostScript Font Substitution
Set whether to use ATCx as a substitute if a PostScript font specified in a job is not present.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
XPS Print Ticket Processing
Set how the machine processes the print tickets written in XPS documents.
îš„Off
Does not process print tickets.
îš„Standard Mode
Uses the standard mode to process print tickets.
To Next Page
Loading...
Need help?
General
