EasyManuals Logo

Fuji Xerox ApeosPort-III C2201 User Manual

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
2 Paper and Other Media
44
Paper and Other Media
2
Changing the Paper Settings
The following describes how to change the paper type for Trays and how to set image
quality processing by individual paper type.
After loading paper in the trays, specify the types of the paper loaded and the image
quality suited to each paper type. Image quality best suited to the paper type can be
obtained by setting the desired image processing to particular paper types. For more
information, refer to "Image Quality" (P.130).
Note • Users can name Custom 1 to Custom 5 displayed in the paper type. For information on how
to set names to Custom 1 to Custom 5, refer to "Custom Paper Name/Color" (P.128).
• The [Setup] screen, which can be displayed by selecting [Setup] in the [All Services] screen,
allows you to change the paper type setting without entering the System Administration
mode, if you have configured the settings to do so in advance. For more information, refer to
"Customize Paper Supply Screen" (P.129)
1
Press the <Log In/Out> button.
2
Enter the Administrator ID with the numeric
keypad or the keyboard displayed, and
select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, then select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools].
123
456
789
0 #
C
<Log In/Out> button

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-III C2201 and is the answer not in the manual?

Fuji Xerox ApeosPort-III C2201 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-III C2201
CategoryAll in One Printer
LanguageEnglish

Related product manuals