EasyManua.ls Logo

Fuji Xerox ApeosPort-III C2201

Fuji Xerox ApeosPort-III C2201
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Problem Solving
482
Problem Solving
14
1
Make sure that the machine has stopped,
and open the front cover of the finisher.
2
Grip Lever R1 of the staple cartridge holder,
and pull out the holder to the right, towards
you.
3
Take out the staple cartridge holder by
gripping the orange lever.
Note The staple cartridge is firmly inserted.
When taking the staple cartridge out of
the machine, strongly pull it out.
4
After removing the staple cartridge, check
the inside of the finisher for any remaining
staples.
5
Pull up the metal part of the staple cartridge
as shown in the figure.

Table of Contents

Related product manuals