Fuji Xerox ApeosPort-III C2201 User Manual

Replacing Consumables
67
Maintenance
3
1 Make sure that the machine is not operating,
and open the front cover of the finisher.
2 Pull out the hole punch waste container
"R4".
3 Empty the container.
4 Insert the empty hole punch waste container
all the way into the finisher.
5 Close the front cover of the finisher.
Note • If the front cover of the finisher is not completely closed, a message will appear and the
machine will not operate.

Fuji Xerox ApeosPort-III C2201 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C2201
Category	All in One Printer
Language	English