Fuji Xerox ApeosPort-III C2201 User Manual

Stapler Faults
485
Problem Solving
14
8 Return the unit to its original position.
Close the front cover of the finisher.
Note • If the front cover is not completely closed,
a message will appear and the machine
will not operate.
If you cannot remove jammed staples even
after you use the above procedure, contact
our Customer Support Center.

Fuji Xerox ApeosPort-III C2201 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-III C2201
Category	All in One Printer
Language	English