15 Appendix
502
Appendix
15
Side Tray (Optional)
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4: 3,000 sheets
B4 or larger: 1,500 sheets
Mixed stack*
1
: 300 sheets
Finisher tray (For paper stapled)
A4: 200 sets or 1,500 sheets
B4 or larger: 100 sets or 1,500 sheets
Booklet tray 20 sets
*2
*1 Based on when larger size paper is stacked on paper.
*2 The amount of paper listed above may vary depending on the
conditions, such as the paper type.
Important • When using 80 g/m
2
paper
Staple Capacity : 50 sheets (90 g/m
2
or less)
Paper Size : Maximum: A3, 11×17", Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 g/m
2
paper
Punch Paper size : A3, 11×17", B4, A4, A4 , 8.5x11", 8.5x11" ,
B5
Number of Holes: 2/4 holes (Option: US 2/3 holes)
Paper Weight : 55-220 g/m
2
Important • When using 80 g/m
2
paper
Booklet Finishing Maximum number of sheets:15 sheets
*1
,
5 sheets (center folding)
Paper size : Maximum: SRA3, 12×18",
Minimum: A4, 8.5 x 11"
Paper type : 64-90 g/m
2*2
64-105 g/m
2
(center folding)
*1 14 sheets when attaching a cover. In the case of center folding, the
maximum number of sheets can be changed by the customer
engineer.
*2 Up to 220 g/m
2
paper can be used for covers. When 91 to 220 g/m
2
paper is used for a cover, paper that can be used for body contents
becomes 64 to 80 g/m
2
.
Important • When using 80 g/m
2
paper
Dimensions/Weight Width 876 × Depth 660 × Height 1,058 mm, 90 kg
Space Requirement
(when connected to the
main unit)
Width 1,922 x Depth 679 mm (Main unit + Finisher-C1 with
Booklet Maker, when the extension tray is extended, when
Bypass Tray is fully extended)
Paper Size Same as the Copy Function
Capacity 100 sheets
Important • When using 80 g/m
2
paper
Dimensions/Weight Width 274 × Depth 469 × Height 128 mm, 1 kg
Space Requirement
(when connected to the
main unit)
Width 1,046 x Depth 679 mm (Main unit + Side Tray, when
Bypass Tray is fully extended)
To Next Page
Loading...
