Replacing Consumables
51
Maintenance
3
1
Make sure that the machine is not operating,
and open the front cover.
2
Put your hand under the ledge of the toner
cartridge shown in the message, and uplift
slightly.
Note • "Y", "M", "C", and "K" denote Yellow,
Magenta, Cyan, and Black respectively.
3
Pull out the toner cartridge slowly, and draw
it out.
Important • Pull out the toner cartridge gently. Otherwise, toner may fly out of the cartridge.
• If you have a used toner cartridge no longer needed, contact your local Fuji Xerox
representative for its disposal.
4
Take out the new toner cartridge of the same
color as the old one from the box, and gently
tilt the cartridge up and down, and then left
and right for three or four times.
5
Hold the cartridge with the arrow mark facing
up, and push the cartridge in slowly until it
stops.
WARNING
Never throw a toner cartridge into an open
flame. Remaining toner in the cartridge
may catch fire and cause burn injuries or
explosion.
If you have a used toner cartridge no
longer needed, contact your local Fuji
Xerox representative for its disposal.
To Next Page
Loading...
Need help?
General
