FUTABA T12K - Page 191

191
<Appendix>
Operation modes
The operation modes available when a stick, trim
lever, or knob is selected are described below.
Linear mode [LIN]
This mode sets ON/OFF to the left or right (up
or down) with the set point as the reference.
Symmetrical mode [SYM]
Left and right (up and down) operations are
symmetrical near the neutral position. For instance,
when you want to switch D/R with the aileron
stick, when the stick is moved to the left or right,
D/R can be turned on at the same position.
Shifting the ON/Off point
The ON/OFF point can be shifted. ON/OFF at
a free position can be changed.
●Blackrange:OFFrange
●Whiterange:ONrange
[Setting method]
1.First,usethePushdialtomovethecursor
tothe[POS]item.
2.Movethestick,trimlever,orknobtothe
pointyouwanttochangeandpushthe
RTNbutton.Thepointisshifted.
3.Toreturntothepreceedingscreen,move
thecursortothe[ON/OFF]atthetopof
thescreenandpushtheRTNbutton.